Looks like you are interested in a ladder rack extension for your RV.
The Stromberg Carlson RV Ladder Extension, part # LA-148 adds an additional 48 inches of length to your RV ladder. It is a simply no-tool installation by using the included rubber straps and attaching them to a 1 inch diameter vertical supports. This is 48 inches long and 14 inches wide and has a weight capacity of 300 lbs. view full answer...
We do carry the Stromberg Carlson RV Exterior Ladder - Black, part # LA-401BA. This ladder has a weight capacity of 250 pounds, and has a customizable length. Considered a universal fit, this ladder will fit to either contoured or straight RV rear walls. view full answer...
We do not offer custom ladders. All of the ladders we offer are universal fit items so you will need to go by the measurements from the product pages for ladders to determine fit. I have linked you to our product page for the ladders we carry. You will also need to consult the RV manufacturer to make certain your RV has structural or framing components that can support a ladder with weight on it. It is possible that the manufacturer does not offer a ladder because there is no suitable mounting... view full answer...
The Surco Exterior RV Ladder # SP501L does come in two pieces but gets mounted to the wall of the RV and would not separate and allow for you to open the rear access doors once installed. The best option we have would be to use a ladder like the Telesteps Telescopic A-Frame Ladder # TE37FR that can fold up to store in one of the cargo compartments of your RV. view full answer...
By blocking or backing, we're referring to a support structure in the wall, like a wall stud. If the ladder is simply fastened to the outer sheathing, the ladder won't have enough support and it will pull out of the wall the first time somebody attempts to climb it. view full answer...
Yeah those trees really hate ladders and AC units let me tell you.
If the ladder or any part of it was bent I recommend replacing it on the grounds of safety issues.
Once aluminum is bent it looses a large amount of structural integrity. No one needs to fall off their RV while climbing the ladder to the roof.
We have the Stromberg Carlson RV Exterior Ladder w/ Hinges - Aluminum - 99-1/2" T x 12" W - Black
# LA-401BA. This comes with all the hardware you need to replace the old unit.
We... view full answer...
With a ladder on the back of your RV it is unlikely you will still be able to fold up the 24 x 84 etrailer Cargo Carrier for RV Bumpers # e96ZR.
Reason why is when the carrier folds up it takes up all the space of the bumper, so unless your bumper protrudes out past where the ladder is you won't be able to. If you want that folding feature, and your ladder is off to the side, a carrier with less width will be able to fold up as you can mount it on the side of the ladder. Granted they may... view full answer...
We do not recommend to modify the Surco Universal Exterior RV Ladder # SP502L to fit your camper as it may compromise the structural integrity of the ladder. However, if you choose too, you should be aware that the steps are welded to the frame of the ladder and are not able to be repositioned. view full answer...
Each option to replace the ladder on your 2018 Newmar Bay Sport motorhome are universal ladders, and you can choose from two different lengths, either 99-1/2 inches (8 feet, 3-1/2 inches) or 84-1/2 inches (7 feet, 1/2 Inch):
- 84-1/2 inches: Surco Universal Exterior RV Ladder # SP502L
- 99-1/2 inches: Stromberg Carlson RV Exterior Ladder - Black # LA-401BA or Silver # LA-401 view full answer...
The bottom rung on the Surco RV Bunk Ladder, part # SP503B is 12-inches from the bottom.
You can remove the bottom caps and the bottom rung and cur the ladder to your desired height. The bottom rung cannot be installed on the ladder legs other than in the places designated for the rung. After you get the desired length you can just re-install the bottom caps view full answer...
All of the RV ladder bike racks we offer are limited to 2 bikes. This is due to the weight of the bikes and the amount of stress additional bikes would cause. I have attached a link to our product page for the ladder bike racks we offer you can check out.
The Swagman 4 Bike Carrier RV Mounted Bike Rack, part # S80600 is not a ladder mounted carrier. It is designed to fit steel square bumpers at least 4 inches wide and not more than 4-1/2 inches wide. view full answer...
If you order the Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401BA, which is black, then you will receive black joints.
However, if you wanted a different color, we do also offer the Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401, which is the same ladder as # LA-401BA, but it is aluminum colored. view full answer...
The rung spacing on center is 12 inches for the Stromberg Carlson Exterior RV Ladder - Aluminum - 99-1/2" Tall - 250 lbs - Black # LA-401BA. view full answer...
You could cut off the two inches that you need from the lower bend on the # LA-401BA but you would need to find a way to crimp the end of the pipes to hold onto the mounting bracket. The ends of the pipes are simply rolled outwards to prevent the bracket from falling off. Most likely your local hardware store will carry some sort of pipe end shaping tool for you to accomplish this. view full answer...
Each of the replacement ladders that we carry are universal fits as we don't carry OEM replacement parts, just aftermarket parts. These ladders will work for your 2017 Grand Design Solitude 310GK but will require installation and they can be cut to fit the exact length you need.
Your options are the Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401 (Silver) or # LA-401BA which measure 99-1/2" tall, or the Surco Universal Exterior RV Ladder # SP502L which is 84-1/2" tall.
I have... view full answer...
The Stromberg Carlson RV Exterior Ladder # LA-401 (Silver) or # LA-401BA (Black) will work as a replacement ladder for your Dutchman toy hauler. These ladders are universal fits so they will work on your trailer; the ladder uses roof mount brackets to attach to the roof of your trailer.
This ladder is 99-1/2" but you can cut off rungs if you need a shorter ladder. It is extremely strong and durable, made out of anodized aluminum to stay free from any rust.
I have added a link to the... view full answer...
I spoke with my contact at Surco and they told me that there have been no issues they are aware of with clearance between the RV and the handlebars. The clearance distance will vary, depending on the clearance between the ladder and the back of your RV. The Surco 2 Bike Carrier, part # SP501BR, you referenced, does feature adjustable cradles which may allow you the ability to move a bike away from the back of the RV. Please keep in mind that the weight on the carrier should be evenly distributed,... view full answer...
Of the ladder mounted bike racks we offer, the Surco # SP501BR model you referenced has the highest weight capacity at 75 lbs. Your combined bike weight is 77 lbs, so if you were to remove the seats from each bike, you'd probably get the load under the 75 lb weight capacity of the rack.
Ladder mounted bike racks are pretty bare-bones, there's not much in the way of padding on them. You can always add padding to the rack. I've found that those pool noodle floatation devices work just great... view full answer...
Go To Results